Optronix XPON ONU Configuration at 192.168.1.1 for Internet

byKhan Basharat -

Fibre Optronix ONU detailed configuration for internet and voice is presented, check admin username and password with necessary configuration info, and find where to get the server IP address to enable secured wifi internet.

Optronix XPON ONU Configuration


Optronix is a new FTTH ONT model, and many get confused with the configuration pattern. Any Fiber modem or router that converts your LAN wire network to WiFi or to multiple system connections has the same confirmation page. 

Just get your Optronix ONU username and password used to access the online page of the Optronix router, and the configuration once changed will be fixed and can only be changed after you use the credentials.

This configuration is essential, as, with no legitimate value, any individual who finds your router name in a WiFi-accessible organization begins utilizing it and could end your whole bundle in a month. According to the security arrangement, it is encouraged to get the Fiber Optronix ONU setup done as soon as can really be expected, if not your information won't be accessible to those involved with different gadgets in your home.


Also Read: NetLink ONU Configuration at 192.168.1.1 for Voice & Internet


Optronix XPON ONU Details

Particulars

Details

IP Address for login

192.168.1.1

Username

useradmin

Password (Default)

1234

WLAN Key (WiFi Key)

12345678

Item Type

Subscriber Equipment

Model Number

RL821GWV

 

The configuration is straightforward for Optronix if you know little about the values that are being changed in the network settings, make sure you change these with prior knowledge, or else you’ll end up with having no internet in your connection.


Optronix ONU Router Internet Configuration

  1. Open your browser and go to the 192.168.1.1 IP link
  2. Enter your username as useradmin and password as 1234
  3. Go to Network from the menu option provided in the list
  4. Click on the delete button to remove all old configurations from the Optronix router
  5. Click on the Add button
  6. Select Internet from Service
  7. Click on LAN1, LAN2, and SSID for WiFi enabling these settings
  8. Select Linked mode as PPPoE
  9. Select IPv4 type
  10. VLAN Mode as TAG
  11. VLAN ID as 135 as below value as 7
  12. MTU as 1492
  13. Tap to enable NAT
  14. Enter your BSNL FTTH username and password in the fields
  15. Click on the Apply button and these Optronix configurations will be done
  16. Click Status and WAN to check your internet-connected status
This is your new Optronics Fiber Configuration has been completed successfully and you can now start using your LAN wired internet for the WiFi setup.

Optronix ONU Voice Configuration

  1. Go to Network from the menu option
  2. Select Voice from Service
  3. Connection Name
  4. Mode Route
  5. IP Protocol Mode as Ipv4
  6. Select Static IP
  7. Enable Vlan and Vlan Id as 1830
  8. Enter the IP add on the ress of ytor
  9. Provide Subnet Mask and Default Gateway for ISP
  10. Enter Primary and DNS of ISP
  11. Select Service mode as Voice

Can anyone change the Optronix Configuration?

As per the default Router,, anyone who has the default credentials can log in and change your Optronix configuration, and if you have set the credentials, then only one who has the credentials can change the Optronix Router configuration.

How to Enable only Wi-Fi in Optronix Router?

In the event that you are doing the Optronix setup, you really want to choose the Service Type as the Internet, and afterward, Just select the SSID choice yet not the LAN choice given, and these will handicap the LAN association and will just permit your switch to just get the Wi-Fi association.

What is the bandwidth to be selected for Optronix Configuration?

It is constantly liked to choose IPV4 alongside the 40 Mbps speed which allows you to utilize the best web information, and these choices will permit you to most extreme Mbps for the LAN association and will give in excess of 100 Mbps speed to the Wi-Fi associated cell phones.


Various, One's here won't have Optronix router but they want one, therefore we have reviewed there some products, with their price, specs, Features, etc

OPTRONIX 1GE+1FE+1POT+WI-FI XPON ONT

OPTRONIX 1GE+1FE+1POT+WI-FI XPON ONT Router is priced at 2399 INR at Amazon India, It was earlier priced at Rs 2500/-, But if you use our affiliate link you will get it at an effective price of Rs. 2399/-
Let's see its Features and Specifications now.
  • Support Route mode PPPoE/DHCP/Static IP and Bridge mode
  • Support IPv4 and IPv6 Support 2.4G WIFI and Multiple SSID
  • Support SIP Protocol For VoIP Service
  • Support Port Forwarding and Loop-Detect
  • Support TR069 remote Configuration and Maintenance
  • Support Firewall Function and IGMP snooping/Proxy Multicast Feature

About Optronix Router:

  • Brand: Generic
  • Frequency Band Class: Single-Band
  • Wireless Type: 802.11a
  • Mounting Hardware: ADAPTER, LAN CABLE,
  • Connector Type: Wi-Fi


Thanks for Reading, Have a nice day :)

Tags:

You might like

View all
Previous Post Next Post
Share to other apps
Copy Post link